How radar level meters are used inside the sanitary industry

　　For example, it is widely used in the petroleum, chemical, pharmaceutical and other industries. It is an instrument that can be used and developed in many fields. The radar level meter is composed of a transmitter, a chip, a bell mouth and other components. It is used to measure the liquid level of various liquid containers.

　　Radar level gauges can be used in high temperature, explosion-proof, anti-corrosion, food and beverage and other occasions, for on-site display or remote display and control of liquid levels. Radar level gauges are less classified, and are divided into 304, 316, PTFE, and several types according to the material. For wineries, stainless steel is generally sufficient. In addition, the so-called sanitary type is characterized by the connection method. The common one is flange connection, and the sanitary type is generally connected with a clamp, which is convenient for disassembly, cleaning and disinfection at any time. There are also direct flange connections, depending on the use environment, occasion, pressure and other conditions.

　　Several points that need to be noted for radar level gauges are: material, capacitance of the measuring medium, correct selection according to temperature and pressure, and determination of the measuring range - the flange spacing rather than the tank height. I hope this can help you. The magnetic flap is a level product with a long history. The technical content itself is relatively low, and there are not many categories. Just pay attention to the selection of materials, floats, and other issues. For example, in the selection of radar level gauges in the wine industry, you can choose 316L stainless steel sanitary products, or you can choose related models of PTFE.

　　Below we introduce the installation method of radar level meter in the sanitary industry.

　　1. When installing the radar level meter, it needs to be installed at 1/4 or 1/6 of the diameter. Note: The distance from the tank wall should be 200mm.

　　2. The top plane of the conical tank can be installed in the middle of the tank top to ensure that the bottom of the cone can be measured.

　　3. When there is a pile of materials, the antenna should be vertically aligned with the material surface. If the material surface is uneven and the pile angle is large, a universal flange must be used to adjust the speaker angle so that the speaker is aligned with the material surface as much as possible.

　　The above is an introduction to the selection of radar level meters in the health industry, food and pharmaceutical industry, as well as the points to note when installing. Qingtian Instruments, as a professional radar level meter supplier, will provide you with quality services.