SUP-LDG Electromagnetic meters are a leading choice to deliver the performance and precision your applications require. These meters are applicable for all conductive liquids, such as water, acids, alkalis, slurries and many others. Typical applications are monitoring of liquids, filling, dosing and precise measurement in custody transfer.
High accuracyElectromagnetic flow meters offer high measurement accuracy and can be used to accurately measure conductive liquids in a wide range of flow rates.
Wide range of applicationsElectromagnetic flow meters are suitable for flow measurement of a wide range of conductive liquids, including acid and alkali solutions, water, sewage and so on.
Simple maintenanceElectromagnetic flow meters have no moving parts and are unaffected by changes in temperature and pressure, making maintenance and calibration relatively simple.
No pressure lossSince there are no flow-obstructing parts in the measuring tube, the electromagnetic flowmeter causes no additional pressure loss to the fluid.
Digital Signal ProcessingAdopting advanced microcontroller technology, digital processing of measurement signals improves the stability and reliability of measurement.
| Product | Electromagnetic flow meter |
| Model | SUP-LDG |
| Diameter nominal | DN15~DN1200 |
| Nominal pressure | DN15 - DN250, PN ≤1.6MPa |
| DN300 - DN1000, PN ≤1.0MPa | |
| DN1200, PN ≤0.6 MPa | |
| Higher pressure can be customized | |
| Accuracy | ±0.5% F.S. (Flow speed > 1m/s); ±0.5% F.S.±2mm/s (Flow speed <1m/s) |
| Repetitiveness | 0.16% |
| Liner material | Neoprene (CR), Polyurethane (PU), PTFE (F4), PFEP (F46), PFA |
| Electrode material | 316L Stainless Steel, Hastelloy C, Hastelloy B, Ti, Ta, Pt |
| Medium temperature | Neoprene: -10…+60℃ Polyurethane: -10…+60℃ PTFE/FEP: -10…+120℃ PFA: -10…+120℃ |
| Power supply | 85-245VAC，50/60Hz, 22VDC-26VDC |
| Structure type | Compact type, Remote type |
| Ingress protection | IP65, IP68(remote type only) |
| Product standard | JB/T 9248-2015 |
Electromagnetic flowmeter working principle is based on Faraday's law of electromagnetic induction, suitable for measuring the conductivity greater than 5μS/cm conductive liquid volume flow. It can not only measure the general volume flow of conductive liquids, but also can be used to measure strong acids and strong alkalis and other strong corrosive liquids and slurries, slurries, pulp, pulp and other uniform liquid-solid two-phase suspended liquid volume flow. Electromagnetic flowmeter sensor and converter two parts of the composition, where the sensor is responsible for detecting the fluid flow generated by the magnetic field changes, the converter will be detected signals converted to standard electrical signal output.
Hangzhou Economic Development Area，Hangzhou 310018，China
