Square tube V-cone flowmeter combines the advantages of V-cone and square tube, with wide range ratio, low installation requirements, high accuracy, wear resistance, and suitable for multiple media. The square tube provides structural strength, space utilisation and good heat transfer. The square tube V-cone flowmeter provides optimised flow measurement solutions for specific industries.
The Square Pipe V-Cone Flow Meter combines the features of a V-Cone Flow Meter and a square pipe to provide unique application benefits.
The main advantages of V-cone flowmeter include:
Wide range ratio: can measure the flow of lower Reynolds number range, the typical range ratio is 10:1, choose the right parameters, can do 50:1.
Low installation straight pipe section requirements: upstream straight pipe section is 0-3D, downstream straight pipe section is 0-1D, compared with other differential pressure flowmeter is reduced significantly.
High Accuracy and Repeatability: Primary element accuracy up to ±0.5%, repeatability better than 0.1%.
Wear-resistant: Due to its design, the V cone is not easily affected by dirty fluids and has long-term stability performance.
Good signal stability: the resulting differential pressure signal fluctuates little and is suitable for stable flow measurement.
Small permanent pressure loss: Compared with the orifice plate flowmeter, V cone flowmeter has lower permanent pressure loss.
Wide range of β coefficient calculation: support a wider range of β value setting.
Self-cleaning function: suitable for flow measurement of dirty media, reducing the need for maintenance.
Wide range of applications: Measurement of almost all flow media, including liquids, gases and vapours.
Advantages of square pipework (square tubing):
Structural strength: Square pipes generally provide better structural strength, especially when subjected to external loads or high internal pressures.
Space Utilisation Efficiency: In some application scenarios, square piping may be easier to adapt to limited space conditions because it fits better into the corners of buildings or other equipment.
Thermal Transfer Characteristics: For applications where heat transfer needs to be considered, square ducting has a larger surface area relative to round ducting, which can help improve heat dissipation efficiency.
Ease of Connection: Connections between square pipework can sometimes be more direct and easier, particularly when flanges or other forms of mechanical connection are used.
Material utilisation: Square pipes can be cut from sheet metal more efficiently during manufacture, reducing waste.
Overall advantages of square pipe V-cone flowmeters:
Applying a V-cone flowmeter to a square pipe can benefit from the characteristics of the square pipe itself, in addition to inheriting all the advantages of the V-cone flowmeter described above. For example, in some specific industrial environments, such as chemical plants or food processing plants, square pipes may be preferred because of their ease of cleaning, good space utilisation and structural strength. In this case, if a square pipe V cone flowmeter is used, it is possible to maintain high accuracy measurements while taking full advantage of the various practical conveniences that a square pipe brings.
In short, the square pipe V cone flowmeter not only inherits the technical advantages of the V cone flowmeter, but also combines the actual application characteristics of the square pipe, for specific industries and environments under the flow measurement provides an optimised solution.
Hangzhou Economic Development Area，Hangzhou 310018，China
