What you should pay attention to when using a metal tube float flowmeter

　　The metal tube float flowmeter is used to measure the medium. After all, the metal tube float flowmeter is a relatively high-precision instrument. However, it must be paid special attention during use. Only in this way can it be more convenient to carry out the measurement. The metal tube float flowmeter has a simple structure, reliable operation, high accuracy and a wide range of applications. There are many types of flow meters on the market, but not all of these flow meters can be put into use. In many cases, people still cannot have a very good understanding of these flow meters.

　　In fact, the metal tube float flowmeter is the most widely used in industry and experimental subjects. That is to say, it is precisely because of the existence of metal tube float flowmeters that the industry can develop more stably. In an era of high-tech development, it is impossible to gain a foothold in society without corresponding science and technology. Compared with glass rotor flowmeters, it can withstand higher pressures. It complies with national standards. Metal tube float flowmeters have local indication, electrical remote transmission, limit switch alarm, corrosion resistance, jacket type, damping type and explosion-proof. It is widely used in the measurement and automatic control of liquid and gas flow in defense, chemical, petroleum, metallurgy, electric power, environmental protection, medicine and light industry. What should be paid attention to when using metal tube float flowmeters? Users should pay attention to the following points when using metal tube float flowmeters:

　　1. The metal tube float flowmeter casing has no grounding terminal, so the user should ground it reliably when using it.

　　2. The wiring of the safety system should avoid the influence of external electromagnetic interference as much as possible, and the cable distribution parameters should be controlled within 0.08μF and 2mH.

　　3. The metal tube float flowmeter must be used in conjunction with the Zener safety barrier to form an explosion-proof system.

　　4. The maximum operating voltage of the control room instrument connected to the safety barrier or the maximum voltage that may be generated inside it shall not exceed 250V.

　　5. The safety barrier must be installed in a safe place. The installation, use and maintenance of the safety barrier must comply with the instruction manual.

　　6. When installing, using and maintaining the metal tube float flowmeter, the user must carefully read the product manual and comply with the "Electrical Safety Regulations for Explosion Hazardous Locations of the People's Republic of China".

　　The above is what the metal tube float flowmeter manufacturer shared about "What should you pay attention to when using a metal tube float flowmeter". Thank you for watching. If you have any questions, you can consult online or leave us a message. We will answer you wholeheartedly.