Electromagnetic flowmeter is a new type of flow measurement instrument that developed rapidly with the development of electronic technology in the 1950s and 1960s.
Electromagnetic flowmeter is a new type of flow measurement instrument that developed rapidly with the development of electronic technology in the 1950s and 1960s. The electromagnetic flowmeter is an instrument that applies the principle of electromagnetic induction to measure the flow rate of conductive fluid based on the electromotive force induced when the conductive fluid passes through an external magnetic field.
1. Strong magnetic field. Since it is generally noted to stay away from strong magnetic field during installation, there is not much practical experience on the influence of strong magnetic field.
2. Strong electromagnetic wave electromagnetic flow meters should comply with electromagnetic compatibility requirements, work normally in the specified radiated electromagnetic field environment, and will not cause performance degradation or abnormal operation of the instrument in this environment. When a separate electromagnetic flowmeter has large common-mode interference on site, the possibility of strong radio waves becoming a source of interference should be considered when analyzing the cause of the failure. This instance is a rare fault during the debugging period.
3. When the pipeline stray current electromagnetic flowmeter is properly grounded, the influence of most stray currents in the pipeline can be avoided. Sometimes thick wires are used to connect the flow sensor across the flow sensor and to be well grounded according to regulations, but it is still affected by stray current and other measures need to be taken.
4. Changes in ground potential. Changes in ground potential will affect flow measurement. For example, a voltage drop on the ground line of other equipment can cause the ground potential of the electromagnetic flowmeter to change. If a large common mode interference is formed, it may Impact measurement.
5. Moisture immersion electromagnetic flowmeters are often used in the water supply and drainage industry to place the flow sensor in an instrument well below the horizon. Therefore, they are often immersed in rainwater that is not discharged in time, or even immersed in water for a long time. Even if the enclosure protection level is IP67 (dust-tight, short-term water immersion level) or IP68 (dust-tight, continuous water immersion level), the sealing gasket of the terminal box cover or the cable entry sealing ferrule is not tightly sealed, and the ferrule is missing. Or the ferrule does not match the outer diameter of the cable, and this type of accident often occurs.
Supmea Automation Instrument Co., Ltd. is a company specializing in the production of electromagnetic flowmeters, turbine flowmeters, vortex flowmeters, magnetic flap level gauges, thermocouples, thermal resistors, bimetal thermometers and various other products. pressure gauges of various specifications, etc., as well as manufacturers of various non-standard flow meters. The company has advanced management levels, modern professional production equipment, and advanced calibration devices.
Hangzhou Economic Development Area，Hangzhou 310018，China
