Electromagnetic flowmeter converter requirements for the installation environment

Requirements for the installation environment of electromagnetic flowmeters. Electromagnetic flowmeters include two important components: sensors and converters. Sensors and converters also have different requirements for the installation environment. The installation environment selection of the sensor was introduced last time. Next, we will introduce several requirements for the installation environment of the electromagnetic flowmeter converter.

The converter of the electromagnetic flowmeter is used as an on-site installation instrument for on-site indication. The requirements for the installation environment are:

1. The installation location of the electromagnetic flowmeter converter should be selected in the absence of Sites with strong vibrations;

2. There should be no corrosive gases around the installation site of the converter;

3. The ambient temperature of the site where the electromagnetic flowmeter converter is selected must be - Between 10 and 45℃;

4. The relative air humidity of the electromagnetic flowmeter converter is 85%;

5. The electromagnetic flowmeter converter is best installed indoors. If you are outdoors, avoid taking measures such as rain protection and sun protection.

When choosing to install an electromagnetic flowmeter, pay attention to the selection of the installation environment. At the same time, pay attention to the selection of the installation environment of the electromagnetic flowmeter sensor and converter. When selecting the electromagnetic flowmeter converter, you can refer to the above 5 points. Requirements for installation, so that the selected environment will be suitable for the installation of the electromagnetic flowmeter.