When choosing a manufacturer of electromagnetic flowmeters for measuring large diameters, you need to consider a number of factors, including the manufacturer's technical strength, product quality, service support, market reputation and product features.
Supmea combines many years of production experience to summarise a few practical suggestions. Choosing a suitable flow meter for large diameter measurements can save a lot of unnecessary trouble later on. Naturally, large diameter pipes have their own unique characteristics.
Service support and market reputation：
- 1、Choose manufacturers with perfect after-sales service system: good after-sales service is the key to ensure the long-term stable operation of the product. When choosing, you can pay attention to the manufacturer's after-sales service network, response time, problem solving ability and so on.
- 2、Refer to the market reputation and user evaluation: By reviewing industry reports, user evaluations, case sharing and other means, understand the manufacturer's reputation in the market and user satisfaction.
Product Features and Scenarios：
- 1、Measurement accuracy and stability: for large diameter electromagnetic flowmeter, measurement accuracy and stability is crucial. Need to choose those products that can maintain high accuracy and stability in a variety of working conditions.
- 2、Corrosion and abrasion resistance: Considering that the large diameter electromagnetic flowmeter may be used for corrosive or abrasive media measurement, it is necessary to choose products with good corrosion and abrasion resistance.
- 3、Intelligent and automated degree: modern electromagnetic flowmeter often has intelligent and automated features, such as automatic online calibration, self-diagnosis, remote monitoring and other functions. These features can greatly reduce maintenance costs and improve efficiency.
Characteristics of liquid flow measurement in large diameter pipelines Large pipeline sizes specify that the lower the wind resistance is better. It is generally not permitted to increase the flow rate by partial reduction. The flow rate is generally very high. The new design programme installed pipeline, are generally selected for economic development of the flow rate. As the flow rate is too low, it is bound to enhance the project investment of the pipeline, and the flow rate is too high, it will lead to a significant increase in the drive power consumption, resulting in an increase in operating costs, all of which are not economic development. However, some old pipelines, because of the necessity of high production and enhance the flow rate.
