The transmitter of the electromagnetic flowmeter has a simple structure, has no moving parts, and does not have any throttling parts that hinder the flow of the fluid.
About the detailed performance introduction of the electromagnetic flowmeter
The transmitter of the electromagnetic flowmeter has a simple structure, has no moving parts, and does not have any throttling parts that hinder the flow of the fluid, so when the fluid passes through It will not cause any additional pressure loss, and it will not cause problems such as wear and blockage. It is especially suitable for measuring liquid-solid two-phase fluids such as slurry with solid particles, sewage, and various viscous slurries. Similarly, since there are no moving parts in its structure, the electrodes can be made by attaching a corrosion-resistant insulating lining and selecting corrosion-resistant materials to achieve good corrosion resistance, making it suitable for measurement of various corrosive media.
Product details: Display part:
1. LCD backlight display
2. Instantaneous flow, cumulative flow meter, flow rod Figure, flow rate percentage
3. One-click query of net cumulative value, positive cumulative value, negative cumulative value, current conductivity equivalent value
4. Multiple units can be switched ( L, m³, Kg, t/s, min, h)
5. 485 communication remote transmission reading data
Sensor method: sensor (body):
1. Upgraded thickened high-strength flange (anti-shedding lining, anti-flagging, anti-leakage)
2. Select electrodes, standard 3 electrodes, which are better than the conventional two electrodes on the market. Measurement More accurate
3. The grounding screw is directly connected to the body, effectively solving electrical interference, good grounding, and ensuring personal safety
Performance sensor (body):
1. Upgraded thickened high-strength flange (anti-shedding lining, anti-flagging, anti-leakage)
2. Use electrodes, standard 3 electrodes, which are better than the conventional two electrodes on the market, and the measurement is more accurate
3. The grounding screw is directly connected to the body, effectively solving electrical interference, good grounding, and ensuring personal safety
Technical parameters of electromagnetic flowmeter:
Accuracy level: ± 0.5%R (five thousandths)
Nominal pressure: 4.0MPA (DN10-DN150)
1.6MPA (DN200-DN600)
1.0MPA( DN700-DN1200)
(Other specifications can be customized)
Installation method: flange installation (default); support installation (customized), clamp installation (customized)
Electrode type: 316L electrode (standard configuration); HB/HC alloy electrode (strong acid-base environment); titanium electrode; tantalum electrode; tungsten carbide electrode; platinum electrode
Lining material: neoprene (CR); polytetrafluoroethylene (F4); polyurethane rubber (PU); polytetrafluoroethylene propylene (F46)
Range ratio: 20:1
Working environment: sensor -25-60℃; converter: -10-60℃ (≥80℃ needs to be customized)
Fluid requirements: conductive medium (conductivity ≥5US/CM liquid)
Electromagnetic flowmeter The sensor has a simple structure. There are no moving parts in the measuring tube, nor any throttling parts that hinder the flow of fluid. Therefore, when the fluid passes through the flow meter, it will not cause any additional pressure loss, and it is one of the flow meters with low operating energy consumption.
The electromagnetic flowmeter can measure the flow rate of dirty media, corrosive media and suspended liquid-solid two-phase flow. This is because the only flowing parts inside the measuring tube of the instrument are the lining and electrodes of the measuring tube that are in contact with the fluid being measured, and their materials can be selected according to the properties of the fluid being measured.
Hangzhou Economic Development Area，Hangzhou 310018，China
