How to view the cumulative flow of electromagnetic flowmeter

1. Understand the cumulative flow of electromagnetic flowmeter

Electromagnetic flowmeter is a common flow calculator used to measure the flow of various liquids and gases. The cumulative flow refers to the total flow flowing through the flowmeter within a certain period of time. In practical applications, understanding the cumulative flow is of great significance for production management, flow control and maintenance.

2. View the accumulated flow rate of the electromagnetic flowmeter

Electromagnetic flowmeters usually have a display screen on which the accumulated flow rate can be viewed. The specific steps are as follows:

1. Turn on the power of the electromagnetic flowmeter. After the power light turns on, connect the flowmeter to the fluid pipe to be measured.

2. Wait for a while until the fluid passes through the flow meter and the flow data starts to display on the screen.

3. View the accumulated flow rate on the display. The cumulative flow rate may be displayed in different units, such as cubic meters/hour, liters/hour, etc.

4. If flow calculation is required, the cumulative flow can be converted into the corresponding flow calculation formula according to the required unit for calculation.

5. If you need to clear the accumulated flow rate, you can find the reset button on the flow meter and press the reset button to clear the accumulated flow rate.

3. Precautions

When using electromagnetic flowmeter, you need to pay attention to the following matters:

1. Calibrate the electromagnetic flowmeter regularly to ensure the accuracy of the measurement results.

2. Clean the electromagnetic flowmeter regularly to prevent pipe blockage from affecting the measurement results.

3. If you need to measure the cumulative flow rate in a specific time period, you can set the start and end time on the electromagnetic flowmeter to measure the cumulative flow rate in the corresponding time period.

IV. Conclusion

This article introduces the method of checking the accumulated flow rate of the electromagnetic flowmeter, covering basic functions such as flow calculation and zeroing. When using an electromagnetic flowmeter, you need to pay attention to calibration, cleaning and selecting an appropriate flow calculation method. Hope the above content is helpful to you.