The normal operation of the Famet turbine flowmeter requires attention to selecting the appropriate type of oil, controlling the amount of oil injected, and arranging the oil injection time.
1. Select the appropriate type of oil
Turbine flowmeters usually require the use of specific high-speed bearings or bearing seats, so before filling with oil, you need to confirm what kind of oil the turbine flowmeter should be used for. types of oil. Generally speaking, oils with low viscosity, high temperature stability, and high corrosion resistance should be selected to ensure stable operation of the turbine flowmeter.
2. Controlling the oil injection amount
The control of the oil injection amount has a vital influence on the working stability of the turbine flowmeter. Too much oil will cause bearing imbalance and cause problems such as vibration and noise in the turbine flowmeter, while too little oil will cause the turbine flowmeter to be in a dry friction state, accelerate bearing wear and shorten the life of the equipment. Therefore, the amount of oil needs to be carefully calculated before filling to ensure that it does not exceed 50% of the bearing capacity. #turboflowmeter#3. Arrange the oil injection time
The arrangement of the oil injection time is also a key factor in whether the turbine flowmeter can work normally. Generally speaking, oiling should be performed with the equipment stopped to better control oil distribution. In addition, it is necessary to strictly follow the requirements of the equipment instruction manual for oil filling to avoid turbine flowmeter failures caused by improper oil filling.
4. Strengthen the maintenance of turbine flowmeters
In addition to the requirements for oil injection, the maintenance of turbine flowmeters is also an important aspect to ensure the normal operation of the equipment. For example, the oil needs to be replaced regularly, and the equipment must be lubricated and cleaned according to the requirements of the equipment manual to ensure that the turbine flowmeter can maintain long-term operational stability and effectiveness.
To sum up, the oil filling of the turbine flow meter is an important part to ensure its normal operation. It is necessary to pay attention to selecting the appropriate type of oil, controlling the oil filling amount and arranging the oil filling time. In addition, it is necessary to strengthen the maintenance of the equipment, replace the oil regularly, and lubricate and clean the equipment to ensure its long-term stable operation.
Hangzhou Economic Development Area，Hangzhou 310018，China
