Electromagnetic flow meter is an intelligent measurement of water flow meter, about its parameters (such as material, protection level, explosion-proof level, etc.) to determine a more complex thing, today electromagnetic flow meter manufacturers Supmea electromagnetic flow meter for the protection level, for you to make a detailed answer.
According to the national standard GB4208-84 and the International Electrotechnical Commission standard IEC529-76, the standards for the protection level of electrical and electrical product enclosures are as follows:
1. IP65: It is a water-proof type. The sensor housing of the electromagnetic flowmeter allows the faucet to spray water on the sensor from any direction of the electromagnetic flowmeter. The pressure of the water spray is 30Kpa, the water output is 12.5L/S, and the distance is 3 meters.
2. IP67: The electromagnetic flowmeter sensor can be used to be immersed in water for a short time.
3. IP68: It is a submersible type. It is suitable for long-term work in water or underground under a certain pressure. At this time, the sensor of the electromagnetic flowmeter is separated from the display part and a split electromagnetic flowmeter must be made, but the protection level requirements of the electromagnetic flowmeter must be emphasized. In general, the protection level should be selected according to the actual situation. If the sensor is required to be installed below the ground and is often flooded, IP68 should be selected. If the sensor is installed above the ground, IP65 and IP67 should be selected. In any case, the display part of the electromagnetic flowmeter cannot be used with water or enter the water, otherwise it will cause damage to the electromagnetic flowmeter.
Supmea has been producing electromagnetic flowmeters for many years. If you have any questions about electromagnetic flowmeters, you can contact Supmea staff at any time and we will help you answer them.
Hangzhou Economic Development Area，Hangzhou 310018，China
