Germany BURKERT electromagnetic flowmeter

In German electromagnetic flowmeters, pursuit and innovation are our unswerving philosophy, and long-term cooperation and joint creation of brilliance are our goals. Our commitment: Customers are God, and we always implement the service tenet of "user interests first". Timely, fast and convenient supply services. Safe, reliable, and complete pre-sales and after-sales services. The company adheres to the quality policy of "technological innovation, full participation, continuous improvement, and mutual consent" to continuously meet customer needs. Corporate culture: integrity, dedication, hard work and innovation. Corporate purpose: Professional achievement, service to society, corporate belief: Passion creates miracles, persistence wins the future. Baode electromagnetic flowmeter is a flow meter developed based on the flange electromagnetic induction principle. When the medium flows through the pipe, it cuts the magnetic lines of force under the action of the magnetic field, and an induced voltage is generated in the medium. The size of the electromotive force is proportional to the speed of the medium moving in the magnetic field, which is converted into volume according to the difference between the pipe and the medium. flow. Baode electromagnetic flowmeter can only measure conductive liquids. It is mostly used in the chemical industry to measure tap water, sewage, sulfuric acid, hydrochloric acid, alkaline solutions, nitric acid and other media. It is especially suitable for the measurement of corrosive media. One thing to note when selecting a model is that the liquid to be measured must be conductive, such as oil products. It is not recommended to use the Boyd electromagnetic flowmeter to measure organic solutions. The selection of materials is also very important. When selecting, different lining and electrode materials should be selected according to the different corrosive properties of the liquid. Two commonly used lining materials are rubber and polytetrafluoroethylene. Strongly corrosive liquids are lined with polytetrafluoroethylene. The electrode materials, in ascending order of corrosion resistance, include 316L stainless steel, Hastelloy, titanium, tantalum, Several types of platinum.

Electromagnetic flowmeter model: V213-FP 638758 KOMP-027-V213-G 638760 KOMP-027-V213-GW 638761 KOMP-027-V213-GK 638764 KOMP-027-V213-GN 638765 KOMP- 027-V213-GP 638766 KOMP-027-V213-GQ 638767 KOMP-027-V213-GR 638788 KOMP-027-V213-GO 638789 KOMP-027-V213-GQ 638790 KOMP-027-V213-GM 6387 94KOMP-012- V213-GD 638797 KOMP-027-V213-GG flow meter advantages: (1) High measurement accuracy; (2) Installation pipeline conditions have no impact on measurement accuracy; (3) Can be used for measurement of high viscosity liquids; (4) Range Wide; (5) The direct-reading instrument can directly obtain the cumulative total without external energy, which is clear and easy to operate. BURDisadvantages of KERT flowmeter: (1) The results are complex and the volume is huge; (2) The type, diameter, and working state of the medium being measured have great limitations: (3) It is not suitable for high and low temperature situations; (4) Most meters only Suitable for clean single-phase fluid; (5) Produces noise and vibration. Electromagnetic flowmeter is a flowmeter that performs flow measurement based on the induction law. The advantage of Burkert electromagnetic flowmeter is that the pressure loss is extremely small and the measurable flow range is large. The ratio of the maximum flow rate to the minimum flow rate is generally more than 20:1. It is suitable for a wide range of industrial pipe diameters, up to 3m. The output signal is linear with the measured flow rate and has high accuracy. The measurable conductivity is ≥5μs/ cm of fluid flow of acids, alkalis, salt solutions, water, sewage, corrosive liquids, mud, mineral pulp, paper pulp, etc. But it cannot measure gas, steam and pure water

Is this planning to transform from a door accessories company into a door product manufacturer? CEO Ying Jun explained: "We are still focused on lock manufacturing. But we no longer just provide door companies with the locks they need, but we must proactively launch new products so that door companies can accept our locks." This year, we have launched several This smart lock with the "+" concept is ahead of many door companies and has elevated the level of our city's lock industry.