Can the V-cone flowmeter withstand a pressure of 100kg?

　　V cone flowmeter is a high-precision instrument, using differential pressure to calculate the flow. The working pressure is 1.0-10.5MPa, and some of them can reach 42MPa. The unit of MPa and kg is not directly converted, and the working pressure is affected by the material and other factors, so it is impossible to directly judge whether it can withstand the pressure of 100kg.

　　First, the basic characteristics of the V cone flowmeter

　　V cone flowmeter is a high-precision, high stability of the new differential pressure flow meter, which is based on the principle of flow continuity and Bernoulli's equation to calculate the fluid flow. The flowmeter uses a special streamlined cone to throttle the flow, through the measurement of the cone before and after the differential pressure generated to calculate the flow.

　　Second, the pressure tolerance of V cone flowmeter

　　Conventional pressure range: the working pressure of V cone flowmeter is usually between 1.0MPa and 10.5MPa, and there are some products with working pressure up to 16MPa or even up to 42MPa. However, these values are all given in MPa (MPa), not in kg.

　　Conversion of pressure units: In order to convert pressure units from MPa to kg, we need to know that 1 MPa is approximately equal to 10.1972 kgf/cm² (kilogram force per square centimetre). Therefore, a pressure of 100kg (if one assumes that this is a uniformly distributed pressure perpendicular to an area) needs to be converted to the corresponding MPa unit for comparison. Note, however, that the conversion here is not directly applicable to the operating pressure range of the V-cone flowmeter, since the operating pressure of a V-cone flowmeter refers to the internal fluid pressure that it can withstand, not the externally applied pressure.

　　Considerations in practical applications: In practical applications, V cone flowmeter working pressure tolerance is also affected by its material, structure, installation and fluid properties and other factors. Therefore, when selecting the V cone flowmeter, it is necessary to comprehensively consider these factors and determine whether it is suitable to withstand a specific pressure according to the specific application scenario.

　　Third, the conclusion

　　As the working pressure of the V cone flowmeter is usually given in MPa, and its pressure capacity is affected by a variety of factors, so it is not possible to directly determine whether it can withstand the pressure of 100kg.