Burkert plug-in flowmeter is suitable for pipeline systems

Burkert plug-in flowmeter can be easily applied to many types of pipeline systems. The direct plug-in flowmeter is more convenient and does not require any other additional pipes. It is economical, affordable and easy to use! We have also greatly promoted the use of burkert insertion flow meters in China! If you happen to choose to use burkert insertion flow meter, you can chat with us online!

When ordering each burkert plug-in flow meter, you need to provide the product order number. The burkert plug-in flow meter supports Germany*. The burkert plug-in flow meter can provide customs declaration forms!

Burkert insertion flow meter 8025 series special:

• DN15 to DN 400• Integrated in the pipeline system, without any additional pipes, economical and practical• 3-wire frequency pulse signal, Can be connected directly to PLC (PNP and NPN) • Can be matched with Burkert split-type equipment

Burkert Insertion Flowmeter Model 8020 insertion flow sensor is specially designed for use in neutral, slightly corrosive, non-containing Liquid with solid particles.

The sensor consists of two parts: turbine and transmitter. As liquid flows through the pipe, the turbine begins to rotate and generates a frequency signal within a transmitter (either a Hall-type or Hall "low-power" type) that is proportional to the flow rate.

The Burkert plug-in connector system allows the sensor to be easily installed in all pipes from DN15 to DN 400.

This flow sensor can be used with other Burkert equipment: such as 8025 T-type flow transmitter or 8025B-type batch controller (panel type or wall-mounted type), 8032-type split flow sensor, etc., and also Can be matched with other adapted equipment (such as PLC, etc.).

Learn about the actual size:

For more inquiries about burkert insertion flowmeters, please click on "Bourkert Flowmeter" for consultation.

1 green FKM seal + 1 black EPDM gasket 552111 ring 619205 oil Ning cap 619204 DINEN cable plug with cable connector (type 2508 DINEN cable plug with NPT1/2” conversion connector without cable connector.