How to use intelligent turbine flow meter

1. Introduction to Intelligent Turbine Flowmeter

An intelligent turbine flowmeter is a device that measures flow by measuring the rotation of fluid on a turbine. It includes components such as sensors, displays, and microprocessors, and can output digital or analog signals as needed, or output via fieldbus. It has very high accuracy and stability and is widely used for flow measurement in chemical, petroleum, pharmaceutical, food and other industrial fields.

2. How to use the intelligent turbine flowmeter 1. Installation The installation location of the intelligent turbine flowmeter is very critical. It is necessary to avoid any foreign objects and valves in the pipeline, and at the same time ensure that the sensor can be fully immersed in the fluid. After installation, a tightness test is required to ensure there are no leaks. 2. Configuration To configure an intelligent turbine flowmeter, you need to connect an LCD screen or other display, input and output signal lines, and set parameters such as measurement units and coefficients. The flowmeter cannot operate properly until all parameters are set correctly. 3. Calibration Before using the smart turbine flowmeter, it is necessary to calibrate its accuracy by using standard liquids. During the calibration process, care must be taken to avoid any shocks and sudden changes, otherwise the accuracy of the calibration will be affected. 4. When using the intelligent turbine flowmeter, you need to be careful to avoid any blow or pressure during normal use; at the same time, do not expose it to any high or low temperature environment to ensure its accuracy. and stability.

3. Precautions for intelligent turbine flow meters 1. Safety When using intelligent turbine flow meters, you need to follow relevant regulations, maintain safety, and protect the equipment; at the same time, if the equipment fails, it needs to be shut down immediately for inspection and repair. 2. Maintenance The repair and maintenance of the intelligent turbine flowmeter requires professional and technical personnel, and the equipment cannot be disassembled or replaced at will. 3. Use environment restrictions The use environment of the intelligent turbine flowmeter needs to be controlled between -20~50°C, the relative humidity does not exceed 80%, and there must be no vibration or magnetic field interference. In short, the intelligent turbine flowmeter is a high-precision and high-reliability flow measurement device, and relevant regulations and precautions need to be followed when using it. #turboflowmeter#