What are the requirements for installing a mass flow meter?

A mass flow meter is a device used to measure the mass flow of gas or liquid. It can be widely used in chemical industry, petroleum, electric power, medicine and other fields. During use, it must be installed and used correctly according to the requirements in order to achieve its optimal performance.

Famimeter mass flow meter

Mass flow meter measures based on the principle of thermodynamics. It uses the heat transfer effect generated when the measured medium flows through the hot wire to calculate the flow volume and density to determine the mass flow rate. Mass flow meters should be calibrated before use to ensure measurement accuracy and stability.

Mass flowmeter installation requirements:

1. Select a suitable installation location

The installation location of the mass flowmeter should be selected where the medium flow is stable and there is no oscillation. area, and stay away from valves, elbows and other parts that may generate eddy currents. At the same time, factors that facilitate maintenance and repair should also be considered.

2. Interface selection

The interface of the mass flow meter should match the pipeline interface, and the inside of the interface should be kept smooth and obstacle-free. When connecting the interface, pay attention to the sealing to ensure no air leakage.

3. Usage environment requirements

The usage environment of the mass flow meter should be dry, ventilated, with appropriate temperature, and avoid direct sunlight and humid environment. When used in special environments, special protective measures are required for the equipment. #massflowmeter#