How does a vortex flowmeter change the total value from tons to square meters?

1. Basic principles of vortex flowmeter

Vortex flowmeter is an instrument that measures material flow based on the principle of vortex effect. In a vortex flowmeter, a rotating vortex is generated when the fluid passes through the pipe. The vortex flowmeter can calculate the flow rate of the fluid by measuring the frequency of the rotating vortex.

2. Application Scenarios of Vortex Flowmeter

Vortex flowmeters are widely used in flow measurement of fluid media such as liquids and gases, especially in petrochemical industries. , chemical industry, electric power, metallurgy and other industrial fields are widely used. Its advantages are simple structure, good stability, high accuracy, wide measurement range, etc.

3. How to convert the cumulative volume of a vortex flowmeter from tons to square meters

The quantity measured by a vortex flowmeter is generally volume or mass, and the cumulative quantity of a vortex flowmeter is generally It is measured in tons. However, in actual applications, in some scenarios it is necessary to convert the accumulated tonnage units into square units, which requires some calculations.

To convert the accumulated tonnage into a square number, you need to know the density of the measured medium. Since the density of different media may be different, the conversion should be based on the density of the medium being measured.

The specific operation methods are as follows:

1. Determine the measurement range and range of the vortex flowmeter, as well as the density of the measured medium.

2. Calculate the mass or volume per unit flow rate.

3. Convert according to this unit to convert the accumulated tonnage into square numbers.

For example, a factory uses a vortex flowmeter to measure flow, and the cumulative unit is tons. The measured medium is coal gas with a density of 0.8 kg/m³. When converting to a square number, assuming that the unit flow rate is 1 kg, then 1 ton is converted to 1000 kg, and then divided by 0.8, then 1 ton is equal to 1250 cubic meters.

IV. Summary

This article introduces the basic principles and application scenarios of vortex flowmeters, and also explains the method for converting the cumulative volume of vortex flowmeters from tons to cubic meters. Vortex flow meters are widely used in industrial production and have good measurement accuracy and stability. In practical applications, unit conversion should be performed in conjunction with the density of the medium being measured to make the results more accurate.