Characteristics of Endress Hauser E+H electromagnetic flowmeter Endress Hauser (Endress Hauser, referred to as E H company) was founded in 1953.
Characteristics of Endress Hauser E+H electromagnetic flowmeter Endress Hauser (Endress Hauser, referred to as E H company) was founded in 1953. It is a world-leading automation instrument group company. E H measurement and automation instruments are widely used in Various industrial sectors around the world.
In order to help users obtain the best process control results, Endress Hauser develops and manufactures a variety of high-tech measurement and control instruments to improve and improve the chemical industry, oil and gas, pharmaceuticals, energy, and source water. and process benefits in wastewater, food, bulk materials handling, pulp and paper, shipbuilding and marine transportation.
E+H Endress+Hauser electromagnetic flowmeter: Vortex flowmeter: rugged and durable, widely used for liquid, gas and steam measurement. Vortex flowmeters are used for volume flow measurement of liquids, gases and steam and are widely used in various industries. In applications in the chemical and petrochemical industries, in power plants and heating systems containing a wide range of fluids: saturated steam, superheated steam, compressed air, nitrogen, liquefied gases, fuel gases, carbon dioxide, *deionized water, solvents , thermal oil, boiler feed water, condensate water, etc.
Endress+Hauser electromagnetic flowmeters are also widely used for mass flow measurement. Therefore, modern vortex flowmeters can be used not only for volume flow measurement, but also for multivariable measurements in conjunction with temperature sensors and flow computers, such as the Prowirl 200. Read the unique Prowirl 200
Prowirl 200 is the only vortex flowmeter that can monitor steam quality in real time and provide alarm information when the moisture content of wet steam exceeds *. Prowirl 200 can be used in flow monitoring systems with high safety levels of SIL 2 and SIL 3. It is certified and evaluated by TüV and complies with IEC 61508 standards.
Features of E+H Endress+Hauser electromagnetic flowmeter:
1. Measurement is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity;
2. Measurement inside the tube *Flow parts, no pressure loss, low requirements on straight pipe sections. It has excellent adaptability to slurry measurement;
3. Reasonable selection of sensor lining and electrode materials means it has good corrosion resistance and wear resistance;
4. The converter adopts a novel excitation method with low power consumption, stable zero point and high accuracy. The flow range can reach 150:1;
5. The converter can be integrated with the sensor or separate;
6. The converter uses a 16-bit high-performance microprocessor, 2x16LCD display, and convenient parameter setting , reliable programming;
7. The flow meter is a bidirectional measurement system with three built-in totalizers: forward total, reverse total and difference total; it can display forward and reverse flow, and has multiple outputs: current, Pulse, digital communication, HART;
8. The converter adopts surface mounting technology (SMT) and has self-test and self-diagnosis functions;
9. The measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity. The sensor-induced voltage signal has a linear relationship with the average flow rate, so the measurement accuracy is high.
10. There are no flow obstructions in the measuring pipe, so there is no additional pressure loss; there are no moving parts in the measuring pipe, so the sensor has an extremely long life.
11. Since the induced voltage signal is formed in the entire space filled with magnetic fields and is an average value on the pipe surface, the straight pipe section required for the sensor is shorter, with a length of 5 times the pipe diameter.
12. The converter adopts single chip microcomputer (MCU) and surface mount technology (SMT), which has reliable performance, high precision, low power consumption, stable zero point, and convenient parameter setting. Click the Chinese LCD to display cumulative flow, instantaneous flow, flow rate, flow percentage, etc.
13. Bidirectional measurement system can measure forward flow and reverse flow. Special production processes and materials are used to ensure that product performance remains stable over a long period of time.
E+H Endress+Hauser electromagnetic flowmeter performance parameters:
Caliber: DN25--DN600 Applicable media: liquids with conductivity ≥50μS/cm, such as: drinking water, Gas-solid content of wastewater, sewage and sludge: gas ≤ 3%; solid ≤ 10% Accuracy: 0.5%MV Repeatability: ± 0.2%MV ± 2mm/s Measuring range: Typical value 0.01-10m/s, greater than 1000:1 Lining material: Neoprene hard rubber, polyurethane rubber Electrode material: 316L stainless steel, HC, HB, platinum iridium, platinum PT, tantalum TA, titanium Ti Electrode form: standard or bullet optional Protection level: IP66 / IP67 / IP68 (can Optional) Temperature resistance: 1. Environmental transmitter -20-60℃, sensor carbon steel flange -10-60℃, stainless steel flange -40-60℃, medium polyurethane lining -20-50℃, hard rubber 0- 80℃ output signal: active current 4-20mA, RL<700Ω (hart RL≥250Ω); electrical isolation, adjustable full scale value, temperature coefficient 2μA/℃; pulse value and polarity optional, pulse width adjustable ( 5-2000ms), high frequency 100Hz. It can also be used as status output. Self-diagnosis: Fault self-diagnosis is available. Empty tube reset to zero: Available. Communication: Can only communicate with HEART protocol. Standard configuration without HEART. Power supply: AC220V, or DC24V (optional). Display: 2 lines of LCD character display. Process connection: Flange BG9115 (DIN2501, BS4504) and ANSI optional Endershaus E+H Promag 10W electromagnetic flowmeter.
Introducing the characteristics of Endress+Hhaus E+H electromagnetic flowmeter E+H main models:
E+H level meter:
E+H radar level meter: FMR230, FMR231, FMR240, FMR244, FMR245, FMR250, FMR530, FMR532, FMR533, FMR540E+H guided wave radar level meter: FMP40, FMP41C, FMP43, FMP45
E+H hammer level meter: FMM50
E+H ultrasonic level meter: FDU91, FDU92, FDU93, FDU95, FDU96, FMU230A, FMU231A, FMU40 , FMU41, FMU42, FMU43, FMU44, FMU90 FMU95, FTU230A, FTU231A
E+H capacitive level meter: FMI21, FMI51, FMI52, FTC2 60, FTC262, FTC968, FTI51, FTI52, T1265, T12892, FTC470Z, FTC471Z, FTC325, FTC625, FMC420, FTI55
E+H tuning fork level meter: FTL20, FTL20H, FTL260, FTL50, FTL50H, FTL51, FTL51C, FTL51H, FTL70, FTL71, FDL60 , FDL61, FTM20, FTM21, FTM50, FTM51, FTM52, FTL325P, FTL325N, FTL375N, FTL375P
E+H rotation limit switch: FTE30,
Hangzhou Economic Development Area，Hangzhou 310018，China
