The operating steps of the Supmea electromagnetic flowmeter can be summarized into the following key steps, which are based on the general operating principles of the electromagnetic flowmeter.
Operation steps of Supmea electromagnetic flowmeter1. Button description: The single button in the upper left corner is the reset button, and the first button from left to right in the lower row is the number addition and subtraction and parameter page turning button. When the cursor is below this, it means enter. key; the 2nd key is the numeric minus key and the parameter page up key. When the cursor is at this position, press this key to exit, that is, the exit key; the 3rd key is the cursor shift key.
Electromagnetic flowmeter2. Press the button * and do not release it. Press the reset button in the upper left corner. At this time, the stopwatch in the middle moves one second. At this time, in the calibration state, press the button 3 on the lower row and the meter will display "Parameter Settings"; at this time, there is a cursor flashing in the lower right corner of "Parameter Settings". Press key 3 (i.e. shift key) to move the cursor above key 1, which is below the upward triangle position. Press key 1 to enter. The screen "00000" is displayed, change "00000" to the password "19818"; use keys 1 and 2 to add and subtract numbers, and key 3 to shift. 3. After "19818" is set, move the cursor to key 1, press key 1 to enter, and the screen will display "Language". 4. Press the 1 button to find the parameter "empty pipe alarm threshold" and modify this parameter to about "240". The factory setting data is "40". 5. After setting, move the cursor to key 2 and press key 2 to exit. 6. Press the reset key to exit to the measurement state. 7. In the electromagnetic flowmeter measurement state, press the 2 button, and the lower row of data can be switched, displaying forward and reverse cumulative flow, cumulative difference, flow velocity, and empty pipe ratio.
Hangzhou Economic Development Area，Hangzhou 310018，China
