Grade selection of outdoor waterproof electromagnetic flowmeter

Case introduction

1. Protection level selection

The protection level of outdoor waterproof electromagnetic flowmeter is usually based on the actual application scenario to choose. Generally speaking, common protection levels include IP65, IP67, IP68, etc. Among them, IP65-rated electromagnetic flowmeters can be used normally in outdoor environments exposed to wind and sun, but cannot withstand the impact of flushing water; while IP67-rated electromagnetic flowmeters can withstand short-term immersion and are suitable for some harsh outdoor environments. Environment; IP68-rated electromagnetic flowmeters can withstand long-term immersion and are suitable for some extreme outdoor environments.

2. Selection of installation location

When selecting the protection level of the outdoor waterproof electromagnetic flowmeter, you also need to consider the choice of installation location. Generally speaking, if installed at a relatively high location, the flow meter needs to have a sufficient level of protection to avoid being affected by emergencies. If it is installed in a relatively low position, it does not require an excessively high protection level, but you need to pay attention to the influence of natural factors such as rain.

3. Selection of applicable scenarios

The applicable scenarios of outdoor waterproof electromagnetic flowmeters are also an important basis for selecting the protection level. If there are trees, buildings and other obstructions in the application scenario, which affect the working effect of the flow meter, then you need to choose a higher protection level; if there are harsh natural environments in the application scenario, such as deserts, seaside, etc., then you also need to Choose a higher protection level to ensure the normal operation of the flow meter.

In short, when selecting the protection level of an outdoor waterproof electromagnetic flowmeter, it is necessary to comprehensively consider the installation location, applicable scenarios and other factors according to the actual application scenario to ensure the normal operation of the flowmeter. At the same time, when installing and using, you need to strictly follow the product instructions to avoid unnecessary problems such as malfunctions.