Supmea Insertion type electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. In the electromagnetic flowmeter, the conductive medium in the measuring tube is equivalent to the conductive metal rod in the Faraday test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field.
Simple structure and light weightEspecially for large-diameter pipelines, this chemical point is more prominent compared to other flow meters.
Easy to installIt can be made into a continuous flow out type structure, which is easy for users to maintain and replace. For the field working conditions of harsh environments (such as corrosion, dirt, high temperature and pressure, etc.), will greatly increase the reliability of the instrument.
Easy calibrationNo need to calibrate the caliber of the device and the caliber of the flowmeter one-to-one correspondence, thus greatly improving the technical economy of the instrument calibration, to solve the large diameter flowmeter manufacturing and use of calibration problems.
Wide range of applicationsA specification of the current-type flow sensor can be used for a variety of pipe diameters, can greatly reduce the number of users spare meters and spare parts, and to the design, manufacture and field use and so on to bring a lot of convenience.
| Size | DN100mm-DN3000mm |
| Nominal Pressure | 1.6 Mpa |
| Accuracy | 1.5% |
| Probe | ABS, Polyurethane |
| Electrode | SUS316L, Hastelloy B, Hastelloy C |
| Structure Type | Integral type, remote type |
| Medium Temperature | -20~+80degC |
| Ambient Temperature | -20~+60degC |
| Ambient Humidity | 5~100%RH(Relative humidity) |
| Measuring Range | Max 15m/s |
| Conductivity | >5us/cm |
| Protection Class | IP65(Standard); IP68(Optional for remote type) |
| Process Connection | 2'' Thread(Standard), 2'' Flange(Optional) |
| Output Signal | 4-20mA/Pulse |
| Communication | RS485(Standard), HART(Optional), GPRS/GSM(Optional) |
| Power Supply | AC220V(Can be used for AC85-250V) DC24V(Can be used for DC20-36V) DC12V(Optional), Battery powered 3.6V(Optional) |
| Power Consumption | <20W |
| Alarm | Upper Limit Alarm / Lower Limit Alarm |
| Self-diagnosis | Empty Pipe Alarm, Exciting Alarm |
The SUP-LDG insertion electromagnetic flowmeter is a type of flow meter that is designed to measure the flow of conductive liquids in large pipes. This type of flow meter is installed directly into the pipe and measures the flow of liquid by detecting the electromagnetic field that is generated by the flow. It consists of a probe that is inserted into the pipe and a transmitter that is mounted on the outside of the pipe.
The transmitter generates a magnetic field that is picked up by the probe, and the resulting voltage signal is proportional to the flow rate. Insertion electromagnetic flowmeters are typically used in large pipes where it is not feasible to install a full-bore flow meter, and they are commonly used in industries such as water treatment, wastewater treatment, and chemical processing. One of the advantages of an insertion electromagnetic flowmeter is that it can be installed without having to shut down the process, which can save time and money.
Hangzhou Economic Development Area，Hangzhou 310018，China
