What is an intelligent electromagnetic flowmeter?

Overview of the intelligent electromagnetic quantity meter:

The intelligent electromagnetic quantity meter is an electromagnetic induction measuring instrument, and its operating principle is based on Farah's law of electromagnetic induction. It consists of sensors and smart signal converters. It can measure the volume of various types of conductive liquids. The measured media include highly corrosive liquids such as acids, alkalis, and salts, as well as paper pulp, mud, mineral slurry, wastewater, seawater, and solid-liquid two-phase liquids. This product is mainly used in petrochemical, steel, electric power, metallurgy, textile, food, pharmaceutical, paper and other industries as well as municipal environmental protection, water conservancy and other fields.

Intelligent electromagnetic meter product classification:

Intelligent electromagnetic meter consists of a sensor and an intelligent signal converter. According to the assembly form of the converter and sensor, it can be divided into two types: integral type and split type. kind of structure.

Style: The converter and sensor are directly assembled into a whole and cannot be separated. Often used in sites with good environmental conditions.

Split type: The converter and the sensor are composed of a single product through a cable. The sensor is installed on site and the converter is installed in a place with good conditions. It is often used in sites with poor environmental conditions, such as in underground wells, beside buildings, and places that are inconvenient for people to reach.

Smart electromagnetic quantity meter energy points:

◆ Degree, good stability, not affected by changes in temperature, pressure, density, viscosity and conductivity of the liquid being measured.

◆The sensor has a simple structure, no joint devices, and no clogging. It is suitable for measuring various liquids containing solid particles, fibers, and suspended matter.

◆There are many choices for wetted materials and can be used for measuring various corrosive liquids.

◆Can be installed horizontally, vertically, or tilted, as long as the measuring tube is filled with liquid and has no air bubbles.

◆Wide measuring range, measuring range ratio 100:1, and the measuring range can be modified.

◆ Zero-point calibration can be performed on-site without affecting the measurement accuracy.

◆Low consumption, less than 7W.

◆On-site LCD displays instantaneous volume, cumulative volume, volume percentage, body speed, and fault alarm.

◆Chinese menu, you can view and modify the parameters according to the prompts. The four buttons can be set by the software at any time, which is convenient and easy to learn.

◆Fault self-diagnosis can realize empty pipe judgment alarm, excitation failure alarm, range alarm, and output signal failure alarm.

◆It can accumulate positive vectors, reverse vectors, and bi-vector differences.

◆Measurement units and decimal points are automatically converted.

◆Anti-proof, etc., anti-mark Exd(ia)iaqⅡCT6.

◆A variety of signal output options: 4~20mA, 0~1kHz, HART, RS485, etc.

◆ key to restore factory parameter settings.