Customer Cases
Supmea produces electromagnetic flow meters that are used in a wide variety of industrial applications.
Supmea produces electromagnetic flow meters that are used in a wide variety of industrial applications.
Electromagnetic flowmeter is mainly used for measuring conductive liquid media, can not be used to measure gas, vapor and a large number of gases containing liquid. Affected by the flow rate distribution, in the axisymmetric distribution of conditions, the flow signal is proportional to the average flow rate. Therefore, before and after the electromagnetic flowmeter must also have a certain length of the front and rear straight pipe section. Susceptible to external electromagnetic interference.
Metal tube float flowmeter can realize field indication, pneumatic remote signal output, electric remote signal output, alarm and other functions. Transparent conical tube metal tube float flowmeter are field indication type. Sometimes equipped with proximity switches, output upper and lower limit alarm signals.
Metal tube rotor flowmeter, also known as metal tube float flowmeter, its use is more widely used, generally used to measure the medium, small flow and micro-flow, the measurement medium is generally clean, not easy to crystallize and solidify, viscosity is not large liquids and gases, steam, the requirements of the medium flow rate changes slowly.
Instrument range it is used to correspond to the current 4-20MA, when the vortex flowmeter with flow totalizer need to instrument range and totalizer range set to the same, when the PLC system or DCS need to use the flowmeter signal, to set their ranges to the same.
Often readers return to ask questions about ultrasonic flow measurement. As a popularization, we will write a number of special articles to introduce some of the relevant knowledge, in order to promote and popularize ultrasonic flow technology popularization and improvement.
The traditional approach to electromagnetic flowmeter sensor measurement is broadly analog - a preamplifier with high input impedance and high input common-mode rejection is used to cope with the effects of sensor leakage currents, followed by a third- or fourth-order analog band-pass filter and a sample-and-hold stage, and finally an analog-to-digital converter.
Electromagnetic flowmeter sensors provide differential outputs. Typical values for their sensitivity are 150 μv/(mps) to 200 μv/(mps). The amplitude of the sensor output signal is doubled because the direction of the excitation current is constantly alternating.
According to Supmea International, today (December 1), 100 units of Meyer's FMC240 electromagnetic flow meters and 1,000 units of converters departed for Kazakhstan, located in the heart of Asia.
Thailand Wastewater Treatment Center, is a well-known local wastewater treatment hub, plays an important role in water purification, Supmea electromagnetic flow meter, dissolved oxygen meter, turbidity meter, ultrasonic level meter and other instruments batch application in the field, for the wastewater treatment to contribute to their strength.
In Canada's water purification plant, our production of pH meters, conductivity meters, flow meters, recorders and other instruments successfully applied to monitor the data in the process, the data will be accurately displayed on the screen in the central control room, the staff can be real-time monitoring and recording of water purification process of the various parameters of the data changes for the subsequent operation of the water plant to provide first-hand information.
New Zealand Dairy covers an area of nearly 100,000 square meters, with 20 advanced automated dairy processing lines and an annual processing capacity of over 200,000 tons of products.
The company is a well-known printing and dyeing the company in Singapore, the factory covers an area of more than 130,000 square meters, building area of more than 50,000 square meters, the annual production of all kinds of high-quality bleaching and coloring fabrics 100 million meters, mainly engaged in textile dyeing, printing; textile sales; import and export of goods, technology import and export and so on.